Protect Your Pride And Joy With The Ghost Immobiliser

Ghost Immobiliser can safeguard your prized item from theft. It is discreet and does not require additional key fobs.

The device makes use of the buttons on your vehicle (steering wheel doors, door panels and centre console) to create a unique changeable pin code sequence that can be up to 20 presses long. This will allow your vehicle to begin.

Simple PIN code Change Process

With the growing rate of vehicle theft, many owners are looking to improve their security. There are a variety of security devices that are sold aftermarket from tracking systems to alarms and immobilisers. However there are a few that are equally effective in protecting your car. While a tracking system may help you find your vehicle in the event of theft, it will not stop the crime from happening in the first instance. Immobilisers, on the contrary are exactly what is ghost immobiliser they state on the tin - they disable your car's motor to prevent it from being started. The Autowatch Ghost is one of the most sophisticated options available, making it virtually impossible for thieves to steal your vehicle.

The ghost device utilizes the buttons on your car to create an unique sequence that needs to be entered to allow the engine to begin. This can be done using the indicator stalk or window buttons. There is also a mobile app that can be used as an emergency PIN override, allowing the driver to operate their car without having to use the button sequence. This is especially useful when you need to hand your car over to a valet service or parking because the immobiliser is active and not deactivated.

The ghost 11 immobiliser is a truly unique and ingenious device that works in conjunction with the buttons on your vehicle instead of being a separate device. It is not only an effective deterrent to vehicle theft, but it can be used to secure any future vehicles you may own. This makes it a better investment than a conventional wheel lock.

Weatherproof small device

The Autowatch Ghost Immobiliser is a sophisticated security device that shields your pride & joy from key cloning and hacking. It also prevents ECU swapping. It is a small weatherproof device that connects with the ECU of your vehicle directly through the CAN bus, causing it to shut down the motor. It can be installed in the vehicle without the need for extra wiring, and has been thoroughly tested to ensure that it works with all vehicles. It is also indestructible to jamming devices, which is a common technique used by thieves to bypass the immobilisers in place.

The advantage of CAN data over conventional systems is that they operate silently. It is not able to be detected by sophisticated RF scanning and code-grabbing technologies, nor can it be recognized by conventional diagnostic tools. The Autowatch Ghost Immobiliser Problems doesn't produce LEDs, but instead utilizes the buttons in your vehicle like the steering wheel or centre console panels to create a unique, programmable disarm sequence. You can make this sequence as long as 20 presses to provide additional security. The iPhone app permits only one, authenticated connection, with the pairing code unique to the ghost vehicle immobiliser and the communication between the two devices is encrypted.

The Ghost also prevents car thieves from using an additional key or replacing the ECU to bypass the immobiliser and begin the engine. It will only allow the engine to start only if the correct pin code is entered. It is also possible to put it into Valet/Service mode for temporary operation (with defined parameters like a 30mph speed limit) so that you can give your car to a valet service or to be serviced without needing to enter a pin code.

Tested for each vehicle

The Autowatch Ghost is a world-first aftermarket CANbus immobiliser. It can be connected to the vehicle's wiring and also to the engine control unit (ECU). The device snoops on electronic signals how to become a autowatch ghost installer disable your car's system from going through its normal start-up routine until you input an individual passcode. The system can be activated or deactivated using your own smartphone application without the need for wires.

The standard factory immobilisers function by using a transponder, which is embedded in the key. This sends a message to the ECU. The car will begin to start if the correct code is transmitted. However, if a transponder from another vehicle is used instead, the immobiliser doesn't recognise it. This enables the vehicle to start and be stolen. A South African company that is at the forefront of car security systems technology developed the Ghost immobiliser. It guards you against key cloning or hacking, and even key theft. Only by physically towing your vehicle away from thieves could they steal it and not be able to drive the vehicle.

ghost autowatch immobiliser makes use of the buttons on your car, such as the indicator stalk as well as the steering wheel and door panels to create an unique PIN sequence that can be changed that must be entered prior to you can use your car. This is done without any additional hardware, like a keyfob. It can take up 20 to 20 presses. It is also undetectable by devices for diagnosis and transmits radio frequency signals, so thieves cannot use sophisticated RF scanners or code grabbing techniques to determine if an installation has been made.

Unlike physical anti-theft devices like wheel locks or clamps, Ghost is covertly integrated into the vehicle so it can't be disabled or removed by thieves and is more difficult to remove from a car alarm which requires disarming via the use of a button sequence. This makes it an excellent alternative to an GPS tracking device which can be used to locate your vehicle after it's been taken.

Emergency PIN code override

You do not have to look far on social media to find stories or videos of vehicles that have been stolen with the latest technology tools. This includes key-cloning and hacking tools that allow you to start your car without the original keys.

Our Ghost immobiliser fights this and gives you an additional layer of security to stop your vehicle from being stolen when it is targeted by thieves. It works by creating a unique pin code push sequence from the buttons you have on the steering wheel, door panel and the centre console. This unique PIN has to be entered in conjunction with your original key fob to prevent the vehicle from getting started. The unique override pin is found on a black plastic card that you will receive after the installation. It is simple to remember because there aren't any LED indicators.

The device is hidden within the wiring of your vehicle and does not emit radio signals. This means it can't be detected using diagnostic software which can identify the security system you have installed. This makes it a fantastic alternative to a tracker.

Contrary to other security systems that rely on a relay located in the engine bay, these immobilisers CANBUS communicate through CAN databus (brand dependent) with the ECU and BCM of the car. This allows them to block the vehicle completely by sending a digital block to the ECU and engine.

These systems can also be linked to a separate alarm immobiliser or tracker. This must be specified prior to installation. They are also service/valet mode compatible and are a great alternative to a tracker if you are you are taking your car in for an electrical fault at the dealership.

Service/Valet Mode

In recent years there has been a increase in the number of vehicles being stolen with no owner's keys. It's now more easy than ever to steal your pride and joy thanks to the availability of key cloning tools and door lock picks. To prevent this from happening, we have launched the Autowatch Ghost immobiliser that prevents your car from being driven even if your keys have been copied or your vehicle has been stolen.

It communicates directly to your vehicle's ECU (Engine Control Unit) through the CAN data circuit. It is completely silent, because it does not utilize radio frequencies or key fobs. This means it cannot be detected by diagnostics or other vehicle hacking devices. It also prevents you from introducing an ECU or key to bypass the system as only the PIN code allows the engine to start.

The device is hidden in your car and is accessed by existing buttons on your steering wheel, centre console and door panels. A unique and reversible PIN code sequence that can be as long as 20 digits must be entered before you can start your car.

This is the first aftermarket immobiliser for CAN bus to be developed that can prevent your car from being driven away or started in the event that a PIN code hasn't been entered before. If you are driving away with the device arming it will display an indicator on your dashboard and flash continuously for about 300m. Entering your PIN code will deactivate the anti-hijack. Your car will continue to function normally. If you do not enter your PIN in this moment the indicator will continue to flash and will require a new PIN every time you attempt to start your car.